SPEEDSOCKET Tool
Description
TECHNICAL DETAILS
FAQs
Full Description
SPEEDSOCKET Tool Only
Perfect for adding an extra tool for those fast pit stops! Or if you stored it in a very secure location (i.e. forgot where it is).
**This is the Speedsocket tool ONLY and it requires the BRE4140 Nuts**
Downloads
Additional Information
| Weight | 0.5 kg |
|---|---|
| Size | 19mm Tool (for M12 studs), 21mm Tool (for M14 studs) |
Delivery
All hazardous goods orders received before 12pm will be guaranteed to be dispatched the same day (depending on stock) and sent via a freight company that provides a standard 3 day signed delivery service.
For an additional cost, the option of a next day service is available throughout the majority of the UK. However, we cannot accept responsibility for orders that may be delayed in transit. Due to their hazardous nature, all fuel orders must be signed for on delivery.
All routine deliveries are made during Monday to Friday. Some routes may be subject to ta longer delivery timescales.
Related Products
Sunoco Methanol S
Sunoco Methanol S is a sustainable methanol made from forestry waste. Typically the purity exceeds 99.99% meaning that impurities are minimised and that the octane numbers are as high as they can get for pure methanol. It has a Motorsport UK approved top lube added, resulting in better lubricity, plus that it burns with a yellow colour.
Available in 20 litre drums.
SUNOCO SUNAPLEX 781 Grease
SUNOCO SUNAPLEX 781 is a water resistant aluminum complex grease. Superior performance lubricating grease formulated from a complex thickener in combination with a highly refined mineral based lubricant and a specially selected additive pack.
FEATURES & BENEFITS
– Very stable consistency, minor changes at high temperatures.
– It has a high resistance against water, steam and salt water.
– High mechanical stability with continuous work.
– Excellent adhesion, effectively protecting lubricated surfaces from corrosion and rust.
– Good sealing capacity and pumpeability.
– Working temperature: -30 ºC to + 160 ºC.
APPLICATIONS
– For multiple applications where a grease with good water resistance properties is needed.
– Suitable for the lubrication of bearings, chains, slide-ways, etc. subjected to medium loads and high temperatures.
Driven Extreme Pressure Spline Grease
Protects Cambered Axle Drive Flanges, Sprint Car Drivelines & Much More
A premium extreme pressure grease with greater load carrying and a higher dropping point than traditional lithium greases. EPC delivers exceptional mechanical stability for improved protection. Designed for high temperature and high load applications.
Engineered for race applications with sliding spline teeth operating at high temperatures & RPM’s: Driven Racing Oil Spline Grease utilizes a high viscosity synthetic base, proprietary anti-wear additives & a Polyurea thickener that is specifically developed to extend durability.
High viscosity synthetic base stocks create enhanced thermal stability and oxidation resistance, while the robust anti-wear additive package is fortified with Moly for excellent wear protection. Meanwhile, the Polyurea thickener controls oil loss from the grease in extreme temperature environments.
BMC Filter Washing Kit
We recommend using original BMC kits only, as other products may not be effective or may damage the filter permanently, thus invalidating the warranty. The kit includes the special BMC detergent and an oil applicator (in the spray or dispenser version).
We recommend regenerating the filter (washing + oil application) every 12,000 – 15,000 miles to ensure best performance and long service life. This value is a rough estimate and can vary based on the climatic conditions and the ground on which the vehicle is used (sand, dirt roads, etc.).
The various steps to be carried out in order to regenerate the filtering element are indicated in the instructions contained in the regeneration kit.
Driven Honing Oil
SONAX MoS2Oil
