/**/

Pitstop Products

Free Expert advice call us on 01929 551 557

Free delivery at events we attend*

Workshop services available

 

BRE 4140 Copper Coated Chromoly Wheel Nuts

Pitstop Products

£65.32 – £150.69 Ex VAT

Need more Nuts?

BRE wheel nuts are made from 4140 Billet Chromoly steel. M12 nuts and 1/2-inch UNF are Roll Formed to meet FIA specification.

Copper version is dipped in a copper coated to provide stronger corrosion resistance and to make them easier to spot in a pit stop. We have also found that the Copper coated makes for an even smoother nut/thread engagement.

Race Car? Do you have longer wheel studs? We now have the Extended BRE Nut option, each nut is counter bored to allow +10mm maximum of wheel stud to protrude from the end of the nut without it picking up the next nut in the Speedsocket.

Sold in packs of 10, 20 & 24

Current Threads available M12x1.25, M12x1.5 & 1/2-inch UNF

NEW: M14 sizes now available in M14x 1.5 in standard 60degree taper and ball seat (R14)

Weights, 31g for Normal 19mm veriant and 34g for extended 19mm, 21mm Extended 39g.

*Extended nut option not available for 6 stud applications, don’t use Extended variant on standard studs that don’t protrude from the nut as the nuts have -10mm counter bore at the start.

Visit Fuel Tech Corner

Product Information

Related products

  • Racing Helicopter Tape

    Helicopter Tape

    Surface Guard Tape is a clear, protective urethane film...

    Details This product has multiple variants. The options may be chosen on the product page £18.75 – £75.00 Ex VAT
  • Oil can

    R Oil Can

    Heavy-duty can suitable for a wide range of fluids....

    Details This product has multiple variants. The options may be chosen on the product page £12.75 Ex VAT
  • Driven Racing Oil

    Driven Coolant System Protector

    Protect your engine block, cylinder heads, water pump and...

    Details This product has multiple variants. The options may be chosen on the product page £10.95 Ex VAT

All hazardous goods orders received before 12pm will be guaranteed to be dispatched the same day (depending on stock) and sent via a freight company that provides a standard 3 day signed delivery service*. For an additional cost, the option of a next day service is available throughout the majority of the UK. However, we cannot accept responsibility for orders that may be delayed in transit. Due to their hazardous nature, all fuel orders must be signed for on delivery. All routine deliveries are made during Monday to Friday. Some routes may be subject to ta longer delivery timescales.

We send most orders for pitstop products, clothing, ancillary and other accessories with APC on a next day service (excluding weekends). The delivery cost for a box is £9.50 + VAT. Lower costs may apply if only ordering a few small items. You will see the exact delivery cost for your order at checkout. If you order fuel at the same time, we will send the other items on the same shipment as the fuel at no additional cost.

Description

Need more Nuts?

BRE wheel nuts are made from 4140 Billet Chromoly steel. M12 nuts and 1/2-inch UNF are Roll Formed to meet FIA specification.

Copper version is dipped in a copper coated to provide stronger corrosion resistance and to make them easier to spot in a pit stop. We have also found that the Copper coated makes for an even smoother nut/thread engagement.

Race Car? Do you have longer wheel studs? We now have the Extended BRE Nut option, each nut is counter bored to allow +10mm maximum of wheel stud to protrude from the end of the nut without it picking up the next nut in the Speedsocket.

Sold in packs of 10, 20 & 24

Current Threads available M12x1.25, M12x1.5 & 1/2-inch UNF

NEW: M14 sizes now available in M14x 1.5 in standard 60degree taper and ball seat (R14)

Weights, 31g for Normal 19mm veriant and 34g for extended 19mm, 21mm Extended 39g.

*Extended nut option not available for 6 stud applications, don’t use Extended variant on standard studs that don’t protrude from the nut as the nuts have -10mm counter bore at the start.

Additional information

THREAD SIZE = WHEEL TAPER

M12x1.25 – 60 degree taper, M12x1.5 – 60 degree taper, 1/2 INCH UNF – 60 degree taper, M14x1.5 – 60 degree taper, M14x1.5 – R1 ball taper
QTY OF NUTS:

10, 20, 24
STUD LENGTH:

NORMAL, EXTENDED

Related products

  • Jet plex

    Jet Plex Lithium Complex Grease

    Premium quality, extreme-pressure, high-temperature lithium complex grease. Contains effective...

    Details This product has multiple variants. The options may be chosen on the product page £11.50 Ex VAT
  • WURTH

    Wurth Brake and Clutch Cleaner

    Wurth brake cleaner comes in a 500ml aerosol and...

    Details This product has multiple variants. The options may be chosen on the product page £6.50 Ex VAT

  • Driven Carb Defender

    Prevents corrosion, cleans deposits and restores power. The growing...

    Details This product has multiple variants. The options may be chosen on the product page £15.25 Ex VAT
  • Neon Race Tape

    ISC Neon Tape

    The original, multi-purpose, coloured duct tape that tears straight...

    Details This product has multiple variants. The options may be chosen on the product page £16.00 Ex VAT